|
Picture M: WS-210A Wheelabrator (Stock #
3185) |
Click
"BACK" button on the left to go back to the main page for this
machine.
|
.jpg) |
|
| Details:
|
| Features: |
Two (2) 13.5" diameter
TruBlast® wheel assemblies, direct driven with 10 h.p., 3600 rpm,
NEMA T-frame motors. |
1/2"
thick Long-Lyfe® liners, in line with wheel blast pattern, with 1/4" thick
rubber throughout
remainder of cabinet and on work door. |
Manganese
steel work hook mounted to a 2" diameter spinner shaft which is protected by
a fitted
manganese sleeve and attached to an oscillating work trolley. |
Gear
motor driven chain and sprocket arrangement produces a work piece rotation
of approximately
18 rpm. |
|
Work
trolley is pneumatically oscillated on a 6" I-beam while work is rotated in
the blast area. |
|
Cabinet
roof spinner shaft slot is sealed with nylon brushes and rubber slot seals. |
Abrasive
media is returned to the belt and bucket elevator by a gearmotor driven 6"
diameter
screw conveyor. |
|
Airwash
separator with counterweighted swinging baffle for maintaining the proper
abrasive curtain. |
|
Pneumatically
operated abrasive control valves for positive control of abrasive flow. |
|
Pneumatic
door lock with timed operation to prevent opening door when abrasive is
flowing to wheels. |
|
Limit
switch on work door to prevent wheel from starting when door is open. |
|
Cleaning
envelope: 30" diameter x 42" high. |
|
Abrasive
charge of approximately 2,000 pounds. |
|
Maximum
load per work hook of 2,000 pounds. |
| Electrical: |
|
Two
(2) 10 h.p., 3600 rpm, NEMA T-frame wheel motor. |
|
One
(1) 1/2 h.p., 1800 rpm, screw conveyor gearmotor. |
|
One
(1) 1/2 h.p., 1800 rpm, spinner hook gearmotor. |
|
One
(1) 1 1/2 h.p., 1800 rpm, elevator drive gearmotor. |
Control
panel equipped with pushbuttons and pilot lights,
emergency stop button and mainline disconnect. |
| Applications: |
|
Idea
for diecast
deflashing. |
|
Scale
and rust removal. |
|
Peening. |
|
Profiling. |
|
Surface
finishing. |
| Optional, Original Auxiliary
Equipment Available: |
|
Dust
collector (1500 CFM) included. |
| Condition: |
|
Good. |
|
Availability: |
|
Machine
is ready for inspection and/or shipping. |
|
Technical
data without obligation – subject to prior sale. |
| Machine Location: |
|
Guelph,
Ontario, Canada. |
| Price: |
|
|
|
|
 
Copyright © 1996-2004 Beta
Die Casting Equipment.
Website Designed and Maintained by SpinMedia
|
home
|
used equipment
|
cold chamber
|
hot chamber
|
automation
|
|
trim presses
|
furnaces
|
rebuilding
|
sell yours here
|
|
equipment search
|
die casting links
| |
