Specifications

Specifications


Profit® from Beta!

Profit® Hot Chamber Machine - Specifications:
LOCKING UNIT		P25/10Z	P50/13Z	P80/14Z	P100/16Z	P125/17Z	P150/18Z	P200/19Z	P250/20Z	P350/23Z
Locking Force	KN ton	294 30	588 60	833 85	980 100	1274 130	1470 165	1862 190	2450 250	3430 350
Closing Stroke	mm inch	160 6.29	220 8.66	235 9.25	250 9.84	265 10.43	300 11.81	320 12.59	350 13.77	400 15.75
Platen Size	mm inch	410x410 16x16	500x500 13.2x13.2	550x550 22x22	616x616 24x24	640x640 25x25	700x700 27.5x27.5	750x750 29.5x29.5	820x820 32x32	930x930 36.5x36.5
Space Between Tie Bars	mm inch	270x270 10.6x10.6	335x335 13.2x13.2	365x365 14.3x14.3	406x406 16x16	425x425 16.7x16.7	470x470 18.5x18.5	490x490 19.3x19.3	520x520 20.5x20.5	560x560 22.8x22.8
Tie Bar Diameter	mm inch	45 1.77	55 2.16	65 2.56	70 2.75	75 2.95	80 3.15	90 3.54	100 3.93	115 4.63
Die Height (min.-max.)	mm inch	125 - 330 4.9 - 13	150 - 360 5.9 -14.2	150 - 430 5.9 - 16.9	200 - 500 7.8 - 19.6	200 - 500 7.8 - 19.6	200 - 500 7.8 - 19.6	200 - 500 7.8 - 19.6	250 - 550 9.8 - 21.6	250 - 600 9.8 - 23.6
Nozzle Break Stroke	mm inch	150 6	150 6	165 6.5	180 7	200 8	200 8	200 8	230 9	250 10
Ejector Force	kN ton	34.3 3.5	34.3 3.5	44.1 4.5	68.6 7	68.6 7	73.5 7.5	83.3 8.5	98 10	117.6 12
Ejector Stroke	mm inch	50 2	60 2.36	70 2.75	90 3.54	90 3.54	90 3.54	90 3.54	100 4	100 4
SHOT UNIT		P25/10Z	P50/13Z	P80/14Z	P100/16Z	P125/17Z	P150/18Z	P200/19Z	P250/20Z	P350/23Z
Casting Force	kN ton	37.2 3.8	47 4.8	58.8 6	73.5 7.5	88.2 9	102 10.4	105.3 10.7	114.2 11.6	135.2 13.8
Shot Stroke	mm inch	100 4	110 4.33	125 5	150 6	165 6.5	180 7	190 75	200 8	200 8
Plunger Dia. (std.)	mm inch	46 1.75	50 2	55 2.25	60 2.36	65 2.5	70 2.75	70 2.75	75 3	80 3.15
Casting Area (max)	cm2 sq/in	128 19	246 38	337 56	377 65	481 70	611 95	701 108	954 152	1275 197
Max Casting Pressure	kg/cm2 psi	239 3440	244 3587	252 3700	265 3890	271 3980	270 3969	278 4086	262 3851	274 4027
Shot Position (0=center)	mm inch	0: -40 0; -1.5	0; -60 0; -2.3	0; -60 0; -2.3	0; -80 0; -3.1	0; -80 0; -3.1	0; -100 0; -3.9	0; -100 0; -3.9	0; -125 0; -4.9	0; -150 0; -5.9
Max Shot Weight	kgs lbs	0.76 1.68	1 2.3	1.4 3.14	2 4.5	2.63 5.8	2.87 6.32	3.5 7.76	4.24 9.35	4.97 10.96
Dry Cycle Speed	per min	20	17	15	15	13	12	12	10	8
Pot Capacity	kgs lbs	200 440	250 550	350 770	350 770	500 1100	500 1100	500 1100	800 1760	800 1760
GENERAL DATA		P25/10Z	P50/13Z	P80/14Z	P100/16Z	P125/17Z	P150/18Z	P200/19Z	P250/20Z	P350/23Z
Hydraulic Max Pressure	kg/cm2 psi	105 1500	105 1500	120 1750	110 1600	120 1750	110 1600	120 1750	110 1600	110 1600
Pump Output	ltr/min gpm	37 9.25	62 15.5	72 18	78 19.5	90 22.5	98 24.5	113 28.25	130 32.5	140 35
Oil Tank Capacity	ltr gal	250 62.5	300 75	350 87.5	350 87.5	450 112	450 112	450 112	500 125	500 125
Pump Motor	kw hp	5.6 7.5	7.5 10	11 15	11 15	15 20	15 20	18.5 25	22 30	22 30
Machine Weight	kgs lbs	3500 7700	4500 9900	5000 11000	5500 12100	6000 13200	6500 14300	7000 15400	8500 18700	11000 24200
Machine Dimensions L x W x H	mm	3640x 1470x 1770	3850x 1560x 1785	4125x 1645x 1910	4125x 1560x 1990	4675x 1695x 2255	4675x 1695x 2255	4675x 1695x 2265	4750x 1800x 2300	4850x 1900x 2400
Machine Dimensions L x W x H	inch	144x 58x70	152x 62X70	163x 65x75	163x 62x78	184X 67x89	184X 67x89	184X 67x89	184X 71x91	191X 75x95
Specifications may vary depending on castings conditions and variables and are subject to change without notice.